Painting is a popular DIY task among Americans. And the paint roller is the most common painting tool used by everyone. However, it runs the problem of leaving roller marks after the paint has dried.
If you’re worried about how to remove roller marks without repainting the entire wall all over again, there is good news for you. We have an easy solution to this problem. So, read along!
How to Fix Roller Marks on Walls?
Follow the 5 steps below to learn how to fix paint roller marks after drying:
Step 1: Marking the Spots
Take a good look at the spots where there are roller marks. Mark them for easy spotting when you begin to fix them. You could use painter’s tape also, and it is a great way of remembering the spots.
Step 2: Start Sanding
Take a sandpaper, possibly 120- or 150-grit, and sand down those areas with obvious roller marks. Make sure that you don’t accidentally remove too much paint. Your goal is to just smoothen or even out that place first.
Step 3: Remove the Dust
After you’ve smoothly sanded all the areas, wipe it carefully with a damp sponge to remove any remaining dust. It is necessary because after sanding, there will be some dust left behind, which might cause some extra marking on the wall too.
Allow some time to dry the area again. However, if you have some paint left, it is a good idea to roll through the roller on those particular areas again to perfectly remove the repair the roller marks.
Step 4: Re-prime If Necessary
You might need to re-prime those areas in case you’ve revealed the drywall while sanding. Re-priming will help the paint adhere to the wall better.
Step 5: Finish by Painting
Now paint the affected parts with the roller ensuring it is sufficiently wet and taking care so that the edges are wet as well. Wait for the paint to dry. Hopefully, by this time, all the roller marks will have gone.
Final Words
If you’re a crafty individual always tackling your home’s painting projects, then you must be tired of seeing roller marks always appearing on the wall. Follow the easy steps we’ve discussed in this article on how to remove roller marks, and you might not have to worry about it anymore.
FAQs
How to prevent roller marks when painting?
Follow these tips to prevent roller marks:
1. Use a smooth finish paint roller for the painting job and make sure to use the right type for the paint. A roller made for acrylic paint can never be used for oil-based paint.
2. Use paint guns for the task since they don’t produce any roller markings on the wall. It is better to use water-based paint guns for watercolors. Airless paint guns also work fine.
3. Make sure to keep the roller sufficiently wet with the paint while rolling on the wall. Oftentimes insufficient paint causes the roller to produce marks on the wall.
How to remove roller paint marks from ceilings?
Gravity plays tricks while painting the ceiling with a roller. However, applying multiple coats of paint helps to avoid paint marks on the ceiling. And if it does, using fine-grit sandpaper works fine to remove them.
How to remove roller stipple?
Roller stipple is when the painted surface becomes dotted with specs and marks. This diminishes the overall look of the wall. Using sandpaper on those areas also helps to remove them.
Related Posts:
7 Best Paint Rollers For Ceiling | Reviews & Buying Guide
10 Best Paint Roller For Smooth Finish In 2021
How to Clean a Spray Gun Between Coats (5 Steps Guide)
What Solvent to Use to Clean HVLP Spray Guns?
